porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Drive Belt|Testing and Inspection|Page 1488 > < Drive Belt|Testing and Inspection|Page 1486
Page 9
background image

6. Unclip lines underneath the Y pipe and remove the middle piece.

7. Undo intake manifold on air filter lid. To do this, turn the 2 fastening bolts 180 degrees and pull the bolts upwards and off. Then pull out the

intake manifolds.

8. Remove the air line on the right air cleaner cover. To do this, unclip the green cap. Insert a screwdriver into the notch of the cap and lever the cap

off.

9. Push snap ring into flange -1- and then pull it off together with the flange -2-.

10. Clip the green cap on again after disassembly.

Drive Belt|Testing and Inspection|Page 1488 > < Drive Belt|Testing and Inspection|Page 1486