Cayenne S (9PA) V8-4.5L (2003)
5. Undo oil filter with special tool (oil filter spanner) 9204 and unscrew it.
6. Remove the oil filter housing vertically downwards. Drain remaining oil into a disposal container.
7. Remove the filter element. Remove the filter downwards and dispose of in accordance with legal requirements.
Note:
^
Do not remove the O-ring with a sharp object.
^
The oil filter housing contains a cutout via which the O-ring can be removed.
8. Clean the oil filter housing -1- and replace the O-ring seal. Clean the oil filter housing thoroughly inside and outside and replace the O-ring.
Carefully lever the O-ring off. The oil filter housing must not be damaged during this procedure.
9. Install the filter element.
Note: Lightly oil the O-ring when installing the oil filter housing.
10. Install the oil filter housing and tighten to 25 Nm (19 ft. lbs.) using special tool (oil filter spanner) 9204 . Lightly oil the O-ring when doing this.
Tightening torque 25 Nm (19 ft. lbs.).
11. Fill in engine oil. The oil change quantity is 8.5 liters after a dripping time of approximately 20 minutes.
12. Fit the underbody panel.
Tightening torques