Cayenne S (9PA) V8-4.5L (2003)
Loosening holder
3. Remove holder for the three coolant pipes. To do this, remove the top part of the plastic holder by releasing the locking lugs (press them together)
and pull it up and off -arrows-.
Mount for coolant pipes
4. Loosen connected coolant hoses on the upper coolant pipes and pull them off.
5. Remove housing cover on coolant regulator. Remove housing cover with the attached heater pipes. The thermostat insert remains fitted.
6. Set down housing cover for coolant regulator with the attached heater pipes.
7. Pull the coolant pipes -4- out of the housing cover -1-.
Heater pipes
Removing lower coolant pipe
Caution:
Danger of injury if the saw slips!
-
Wear protective gloves.
-
Work carefully.