Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-344006.png)
Pressing in connection piece
4. Slide both clips and the piece of hose onto the coolant pipe. Push on the screw-type clamps in an offset position. Slide piece of hose on fully so
that it does not project out. Insert coolant pipe with the greased sealing rings into the crankcase.
Fitting coolant pipe with hose and clips
5. Turn the coolant pipe towards the connection piece and slide the coolant hose onto the connection piece. When removing it later, the coolant hose
should be cut open and replaced if it is seated very securely.
Hose in position
6. Press all components into the correct position and move the clips so that they can be fitted without colliding. Move clip locks into an offset
installation position -8- and tighten them.
