Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-347009.png)
8. Engage refrigerant lines in the holder on the wheel arch, close them and fasten with fastening screw -2-. Refer to tightening torques.
9. Engage the holder on the refrigerant line.
10. Push refrigerant line -A- into the condenser and screw it in on the condenser with the fastening screw. Refer to tightening torques.
-
Install external power supply.
-
Install left air cleaner housing.
-
Install right wheel housing liner.
-
Fit engine guard.
-
Fit front left wheel.
-
Observe the safety regulations when working with refrigerants. Refer to, Safety regulations for working on air-conditioned vehicles and dealing
with refrigerant R134a.
-
Top up with refrigerant.
-
Install front left covers (engine compartment cover).
Installing Compressor/Evaporator Line (C - D)
NOTE:
-
Check the sealing rings of the refrigerant lines and replace them if necessary.
-
Coat sealing rings with refrigerant oil before fitting.
