Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-323005.png)
18. Place the cover on the air cleaner housing and run it in from top to bottom. Make sure that the three fastening lugs run into the mounting points on
the underside. The figure gives a clearer view of the dismantled air cleaner housing.
19. Push cover up against the air cleaner housing and lock the two fastening clips.
NOTE: Point 20 must only be carried out for vehicles with air suspension.
20. Push the air suspension line onto the right air cleaner cover.
21. The coolant bleeder hose and the coolant overflow hose must be clipped back onto cylinder bank 1 - 4 on the air cleaner housing.
NOTE: The air cleaner housing of cylinder bank 5 - 8 is installed in the same way.
22. Attach the vacuum line to the underside of the Y pipe.
