Cayenne S (9PA) V8-4.5L (2003)
Installing design cover of cylinder bank 1 - 4
NOTE: Place a cloth between secondary air pump bracket and design cover to avoid scratching the cover.
1. Install bracket for the torque support. The M8 x 45 Torx screws are tightened at the upper screw points. Tightening torque: 23 ftlb. At the lower
screw-mounting points (centre of valve cover) the M6 x 40 are first tightened to Initial tightening: 3.5 ftlb. and then to Final tightening: 7.5 ftlb..
2. Slide the design cover of cylinder bank 1 - 4 under the secondary air pump bracket as shown in the illustration and then slide the cover of the
second ignition coil through underneath the torque support bracket.