Cayenne S (9PA) V8-4.5L (2003)
Wheels: Testing and Inspection
Checking disc wheels
Checking the radial and lateral runout
Note!
^
Straightening and welding work on light alloy wheels is not permissible!
Maximum permissible radial runout and lateral runout of the light alloy wheels = 0.7 mm.
Maximum permissible radial runout and lateral runout of the wheel with tyre = 1.25 mm. Values less than 1.0 mm - better around 0.5 mm - are
desirable. For this purpose, match the tyre (turn the tyre on the rim) if necessary.
Note!
^
Use a lyre measuring gauge - e.g. VAG. 1435 - to measure wheels without tyres and wheels with tyres.