Cayenne S (9PA) V8-4.5L (2003)
1. Push the water line of the windscreen washer system together with the rubber sleeve from the engine compartment side outwards through the
spring strut mount "arrow A".
2. Install rubber sleeve from the wheel housing side on the spring strut mount "arrow B".
3. Install tank for windscreen washer system.
4. Install front right wheel housing liner.
NOTE: During removal damaged clips are to be replaced by repair clips.
5. Clip wiring harness to bonnet hinge "arrows A" and fold the insulating mat back into its original position "arrow B".
6. Push together plug connection "arrows A" until the locking tab can be felt engaging.
7. Clip plug connection into the plug retainer "arrow B".