Cayenne S (9PA) V8-4.5L (2003)
11. Unclip wiring harness using a release lever "a" removal tool, universal 21 refer to 'Tools' "arrows".
12. Press out rubber sleeve to the inside "arrow A".
13. Pull out wiring harness on the outside "arrow B".
Removing Wiring Harness For Door - Door Unit Carrier
1. Push wiring harness and rubber sleeve through the opening from the outside to the inside "arrow A".
NOTE: After installation, the rubber sleeve must run up to the A-pillar.
2. Press rubber sleeve into door unit carrier from the inside "arrow B" until it is felt to engage "arrows".
3. Clip wiring harness to door unit carrier "arrows".