Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-1281037.png)
NOTE:
-
When connecting, make sure the order of the wires "1 - 7" is correct in the combination connector.
-
The wires "6" and "7" are only available on vehicles that are equipped with a light in the rearview mirror.
8. Slide the wiring through the mirror base "arrows A" and pull out on the inside "arrow B".
9. Link up connector to the mirror adjusting motor "arrow A" until the connector lock "B" engages firmly.
10. Connect together the plug connection to the fold-in motor "arrows A" and press on the adhesive point on the mirror holder "arrow B".
