porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Wiring Harness In Engine Compartment|Page 6197 > < Removing and Installing Wiring Harness In Engine Compartment|Page 6195
Page 41
background image

4. Press out rubber sleeve "arrow A" and remove wiring harness through pneumatic spring housing "arrow B".

5. Release wiring duct "arrow A" and remove from hinge "arrow B".
6. Release cover "arrows C", remove from wiring duct "arrow D" and take wiring duct off wiring harness.
7. Remove the rear spoiler

8. Cut fabric tape "A" and remove lead to GPS sensor "B".

Removing and Installing Wiring Harness In Engine Compartment|Page 6197 > < Removing and Installing Wiring Harness In Engine Compartment|Page 6195