Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-1281056.png)
a. Press the connectors of the two secondary air pumps together "a" and disconnect.
7. Disconnect the plug connectors from the hall sender and temperature sensor.
a. Actuate the connectors from the hall sender and temperature sensor "a" and disconnect.
8. Open the fastening clips holding the lines.
a. Open the 4 fastening clips on the rear side of the engine by raising them "arrow" and take out the wires.
9. Disassemble the front crankcase ventilation.
a. Press the connectors on the front crankcase ventilation together "a" and disconnect.
10. Disconnect the plug connections to injection valves 1-8.
a. Actuate the retainer on the connector for the injection valves "a" and remove the connector.
