Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-1281063.png)
a. Position the crankcase ventilation and press on until the connections engage.
13. Secure the wiring harness with fastening clips.
a. Lay the wiring harness to the rear side of the motor and in the fastening clips.
b. Close the fastening clips.
14. Connect the plug connectors from the hall sender and temperature sensor.
a. Insert the electrical connectors until they perceptibly engage.
15. Connect the plug connectors for the secondary air pumps.
a. Press both electrical connectors on the secondary air pumps until they perceptibly engage.
16. Connect the crankcase ventilation.
