porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Wiring Harness In Engine Compartment|Page 6225 > < Removing and Installing Wiring Harness In Engine Compartment|Page 6223
Page 69
background image

Removing Wiring For Electrically Adjustable Seat

CAUTION:

-

Danger of injury and damage to property as a result of incorrect handling of airbag units.

-

Always observe the safety regulations for handling airbag units. Refer to Safety regulations for handling airbag and belt tensioner units.
-

The airbag unit must always be deposited so that the airbag opening faces upwards.

-

If removed for an extended period, the airbag unit must be kept in a locked place.

-

Remove ignition key. Disconnect the battery and cover battery terminal. Refer to Battery.

-

After the battery is disconnected, always wait for 1 minute before disconnecting the airbag plugs.

1. Remove front seat.

Removing and Installing Wiring Harness In Engine Compartment|Page 6225 > < Removing and Installing Wiring Harness In Engine Compartment|Page 6223