porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Wiring Harness In Engine Compartment|Page 6231 > < Removing and Installing Wiring Harness In Engine Compartment|Page 6229
Page 75
background image

12. Push footwell light onto the cable plug "arrow A" until the locking tabs engage audibly "arrows B".

13. Attach the plastic strip of the backrest covering to the spring core "arrow".
14. Install front seat.
15. Connect the battery.

-

Carry out work instruction after disconnecting the battery.

Refer to Work instruction after disconnecting the battery

Battery Wiring Harness - Removing and Installing External Power Supply

Battery Wiring Harness - Removing And Installing External Power Supply

Removing External Power Supply

CAUTION:  Risk of injury and damage as a result of a short circuit:  The ground lead for the battery must be disconnected before you start to remove
the external power supply Refer to Work instructions after disconnecting the battery.

Remove front left covers (engine compartment cover).

Removing and Installing Wiring Harness In Engine Compartment|Page 6231 > < Removing and Installing Wiring Harness In Engine Compartment|Page 6229