Cayenne S (9PA) V8-4.5L (2003)
1. Position B+ lead "4" on the bottom of the external power supply and tighten with the fastening screw.
2. Close the cover cap until the cap engages.
3. Turn the holder by 180°, position it and tighten it with the three fastening screws onto the body.
4. Open the cover cap for the B+ screw connections. First position B+ lead "2" and tighten with the fastening nut, then position B+ lead "3" and
tighten with the fastening nut.
5. Close cover "A" until the cover engages audibly.
6. Position steering hydraulics servo oil reservoir on the holder and tighten with fastening screw "1".
-
Install front left covers (engine compartment cover).
-
Connect ground lead for the battery and follow the working instructions after disconnecting the battery. Refer to Work instructions after
disconnecting the battery
Removing and Installing Wiring Harness For Auxiliary Heater
Removing And Installing Wiring Harness For Auxiliary Heater