Cayenne S (9PA) V8-4.5L (2003)
2. Open the retaining clips -arrow A-and take out the DME control module wire harness -arrow B-.
3. Unscrew the fastening screw -2- and the two fastening nuts -3- and take out the support for the DME control module.
Removing intake pipe on the heating/fresh air unit
1. Pull out wire harness retaining clips on the intake manifold -arrow A- and unclip the wire harness on the intake manifold -arrow B-.
2. Pull out air inlet grille -arrow C-.
3. Open both retaining clips in the intake manifold -arrow D-.
4. Unscrew the two fastening nuts -1- and remove the intake manifold.
Repair main wire harness (PSM connector)
WARNING: Risk of damage to the electrical wiring.
-
Malfunction of the brake system.
-
The work procedure shown may only be performed by an "experienced" skilled worker.