Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-780007.png)
6. Tighten exhaust screws and nuts to a tightening torque of 23 Nm (17 ftlb.).
7. Install new exhaust clamps. The bolts must be pointing downwards. Maximum inclination: 10 degrees. Tightening torque: 60 Nm (44 ftlb.).
8. Tighten cardan shaft between front wheel drive and transfer box to a tightening torque of 30 Nm (22 ftlb.) + 90 degrees torque angle.
9. Install underride guard with transverse strut. Tighten fastening screws to 10 Nm (7.5 ftlb.).
View shows transverse strut
