Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-813002.png)
3. Separate the electrical connection from the throttle adjuster. To do this, press on the plug at the top and bottom and, at the same time, pull it off.
Unclip the cable from the sheetmetal holder.
4. Release the fastening pins on the throttle body. To do this, twist pins through 45 degrees in an anti-clockwise direction. The dot on the pins must
appear as illustrated in the figure.
5. Remove the fastening pins. To do this, grasp the pin by the rubber ring with a pliers and pull it out.
6. Pull off the Y pipe from the throttle body.
7. Disconnect the air flow sensor connections. To do this, undo the hose clamps on the left and right on the bellows and pull the bellows off the air
flow sensors.
