Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-817008.png)
22. Lift the cover on the front edge and slide the ignition coil cover of the second cylinder out of the torque support bracket. Then pull off the cover to
the front.
23. Unscrew the 4 fastening screws on the design cover 5 - 8.
24. Remove design cover of cylinder bank 5 - 8. To do this lift the cover slightly with both hands on the side pointing towards the intake system until
it is released from its retainer.
25. Lift the front of the designer cover and remove it.
