porsche Workshop Repair Guides

Porsche Cayenne S Workshop Service and Repair Manuals

Ignition System - Bar Ignition Module Replacement|Page 3843 > < Crankshaft Position Sensor|Locations
Page 1
background image

Ignition Coil: Technical Service Bulletins
Ignition System - Bar Ignition Module Replacement

Bar Ignition Modules on V8 engine (16/07)

INFORMATION

This Technical Information replaces the TI dated July 5,2007.
Changes/additions compared to the previous Technical Information:

-

Model year extended (was 2003 - 2006).

-

Vehicle type added.

-

Part numbers added.

-

Text changed under "Procedure:" and "Action Required:".

-

Information added (not faulty/redebiting).

Vehicle Type:

Cayenne S/Cayenne GTS/Cayenne Turbo/Cayenne Turbo S (1st & 2nd Generation Cayennes)

Model Year:

As of 2003

Concerns:

Bar ignition modules with Part Nos. 948.602.104.00/...01/...02/...03

Information:

Procedure for replacing faulty bar ignition modules.
If a bar ignition module is diagnosed as faulty on the engine of one of the vehicles mentioned above, the following procedure shall apply:

Procedure:

Read off the part number on all bar ignition modules on model year 2003 - 2006 engines.

INFORMATION

-

The part number is shown on the side of the bar ignition module (--> Figure 1 -arrow-).

-

The modules must be replaced either as a complete unit or individually, depending on the part number of the installed bar ignition modules; see
-->Action Required

Action Required:

Ignition System - Bar Ignition Module Replacement|Page 3843 > < Crankshaft Position Sensor|Locations