Cayenne S (9PA) V8-4.5L (2003)
3.3
Select "kick down" input signal.
3.4
Press accelerator pedal up to first stop, without overpressing the mechanical resistance.
3.4.1 Display in Tester display "not actuated":
--> Kick down adaptation has been carried out correctly, --> continue with step 4.
3.4.2 Display in Tester display "actuated":
--> Perform "Kick down adaptation" again, --> continue with step 2.
4.
Concluding work.
4.1
Switch off the ignition.
4.2
Switch off the PST2 or PIWIS Tester and disconnect from vehicle.
4.3
Disconnect charger from vehicle.
References:
POSES, Workshop Manual, Cayenne:
>
Group 2: 24 70 19 - Removing and installing DME control module
Disclaimer