Cayenne S (9PA) V8-4.5L (2003)
11. Install cap nut, cap, nut with tab washer and rubber washer on the multi-function switch.
Nut tightening torque: 7 Nm (5 ft. lbs.)
Cap nut tightening torque: 15 Nm (11 ft. lbs.)
12. Connect compact connector on multi-function switch.
Note: When installing the shield, ensure that all fastening parts are present and inserted correctly.
13. Install shield on the transmission. To do this, screw in three fastening screws.
Caution: Screw threads used to fasten transmission crossmembers on holder can pull out.
^
Follow the sequence for the procedure.
Note: Screws which are tightened with a torque angle must be replaced with new ones.
14. Installing transmission cross members:
^
Screw in two cross member screws -B-on transfer box holder.
^
Screw in bolts -A- on body.
Tightening torques -B- : 50 Nm (37 ft. lbs.) + 90° torque angle