Cayenne S (9PA) V8-4.5L (2003)
^
Unscrew bolts -A- on body.
^
Unscrew two transmission cross member screws -B- on transfer box holder.
5. Remove shield on the transmission. To do this, unscrew three fastening screws.
6. Pull out cable on multi-function switch.
7. Remove cap nut, cap, nut with tab washer and rubber washer on the multi-function switch.
8. Unscrew fastening screws on the multi-function switch and remove switch.
Installing multi-function switch
1. Position multi-function switch on the selector shaft.
2. Adjust multi-function switch.
3. Connect cable on multi-function switch.