Cayenne S (9PA) V8-4.5L (2003)
Spark Plug: Service and Repair
Replacing Spark Plugs
Tools
Preliminary work
1. Switch off ignition and remove ignition key.
Removing design cover
Removing design cover of cylinder bank 1 - 4
1. Remove engine compartment cover on the right and rear. To do this, undo the four bayonet screws and the fastening screw on the washer-fluid
reservoir.
2. Detach the torque support. To do this, unscrew the fastening screw on the torque support bracket and pull it out.
3. Detach the torque support from the body and swivel upwards.