porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Customer Interest for Air Bag Harness: > < Air Bag System - Warning Lamp ON/Codes 1217/1218|Page 7300
Page 4
background image

4.2

Clip in the socket of ground strap (Figure 6, Item 1) in the connector bracket of the rear seat suspension and connect with connector of side airbag
ground strap (Item 2).

4.3

Clip in the modified wire harness on the connector bracket (= position of previous side airbag plug connection) and tighten to the seat suspension
with a tie-wrap

4.4

Engage the right tensioning strap of the backrest cover (Figure 6, arrow A).

5.

Modify plug connection on passenger's seat.

5.1

Carry out the work listed from Steps 2 to 4.4 on passenger's seat.

6.

Concluding work.

6.1

Install front seats.

6.2

Erase fault memory in airbag control unit with PST2 or PIWIS Tester.

Working Time:

References:
POSES, Workshop Manual, Cayenne:
>

Group 2: 27 06 19 - Removing and reinstalling battery

>

Group 6: 69 - Safety regulations for handling vehicles with airbag and belt tensioner 69 01 00 - Airbag diagnostic

>

Group 7: 72 01 19 - Removing and reinstalling front seat.

>

Group 9: 9 - Work instructions after disconnecting the battery

Cayenne Technical Information Bulletin: Group 6, # 9/04 - Airbag warning light activated

Disclaimer

Customer Interest for Air Bag Harness: > < Air Bag System - Warning Lamp ON/Codes 1217/1218|Page 7300