Cayenne S (9PA) V8-4.5L (2003)
4.
Pull and smoothen rubber tubes on the centering pegs of the airbag contact unit (Figure 1. Item A).
Note:
Ensure that there are no bulges on the rubber tubes.
5.
Grease the the rubber tubes (Figure 1 Item A) with grease Part No. 000 043 205 83.
6.
Install the steering wheel in straight ahead position and tighten it with a torque of 50 Nm (37 ft-lb.).
Note:
Use new multiple-tooth screw, Part No. N 910 207 01.
7.
Install driver's side airbag.
8.
Remove the vehicle from the hoist.
Working Time
Literature
Disclaimer