Cayenne S (9PA) V8-4.5L (2003)
3. Unlock retainer clip on the belt end mount with an appropriate screwdriver -arrow A-.
4. Push belt end mount over the retaining pins -arrow B- until the lug relaxes the clip underneath the retaining pin.
5. Remove belt end mount from the retaining pin -arrow A- and pull seat belt out through the belt guide -arrow B-.
6. Remove the fastening screws -1- on the top belt lug.
7. Twist the top belt lug -arrow A- and push downwards behind the holder -arrow B-.
8. Pull out belt lock -C- with belt end mount -D- towards the bottom.
CAUTION:
-
Danger of injury and damage to property as a result of incorrect handling of airbag units.
-
Always observe the safety regulations for handling airbag units.