porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Front Three-Point Belt|Page 7450 > < Removing and Installing Front Three-Point Belt|Page 7448
Page 2
background image

5. Unscrew fastening screws -2- and remove the retainer frame from the backrest.

CAUTION:
-

Danger of injury and damage to property as a result of incorrect handling of airbag units.

-

Always observe the safety regulations for handling airbag units.
-

The airbag unit must always be deposited so that the airbag opening faces upwards.

-

If removed for an extended period, the airbag unit must be kept in a locked place.

-

Remove ignition key. Disconnect the battery and cover battery terminal.

-

After the battery is disconnected, always wait for 1 minute before disconnecting the airbag plugs.

6. Unfold protective cover on the connector -arrow A- and maintain in this position.
7. Release connector -arrow B- and pull off -arrow C-.

8. Release connecting socket -arrow A- and pull it off the clip -arrow B-.

Removing and Installing Front Three-Point Belt|Page 7450 > < Removing and Installing Front Three-Point Belt|Page 7448