Cayenne S (9PA) V8-4.5L (2003)
CAUTION:
Danger of injury.
-
This is a two-stage airbag module which must be ignited separately.
Remove the steering column trim.
1. Disconnect connector from the airbag on the steering column switch and first plug in the connector -B- -1st stage- from the adapter cable 9257/4.
2. Connect the ignition device 9257 to the 2-pin connector from the adapter cable.
3. Place the ignition device in front of the vehicle through the door gap.
4. After triggering the step, repeat with the connector -C- - 2nd stage-.
Passenger's side
CAUTION:
Danger of injury.
-
This is a two-stage airbag module which must be ignited separately.
Remove cover under right instrument panel.
Remove glove compartment.
1. Plug in the adapter cable 9257/4 first to the left airbag unit connector -A-.
NOTE: This is a two-stage airbag module with the right connection - 1st stage, and the left connection - 2nd stage.
2. Connect the ignition device 9257 to the 2-pin connector from the adapter cable.
3. Place the ignition device in front of the vehicle through the door gap.
4. After triggering the step, repeat with the connector -D- - 2nd stage.
Side airbag
Move the seat to the uppermost position.