Cayenne S (9PA) V8-4.5L (2003)
Ultrasonic Sensor: Service and Repair
Removing And Installing Sensor For Passenger Compartment Monitoring
Removing The Sensor For Passenger Compartment Monitoring
Remove ignition key.
1. Removing cover for interior light. From the side of the windscreen, hold onto the center of the bulb cover and pull down the cover. Unclip the
cover of the light unit and unscrew both fastening screws.
2. Open the glasses compartment, and unscrew both fastening screws.
3. Detach the roof console around the sliding roof switch on the roof liner and allow it to hang down toward the front.
4. Press the electric connector "4" on the compartment sensor "a" and unplug.
5. Unclip the sensor from the frame of the roof console and remove it.
Installing The Sensor For Passenger Compartment Monitoring