Cayenne S (9PA) V8-4.5L (2003)
Note: When installing the shield, ensure that all fastening parts are present and inserted correctly.
4. Install shield on the transmission. To do this, screw in three fastening screws.
Caution: Screw threads used to fasten transmission cross members on holder can pull out.
^
Follow the sequence for the procedure.
Note: Screws which are tightened with a torque angle must be replaced with new ones.
5. Installing transmission cross members:
^
Screw in two cross member screws -B- on transfer box holder.
^
Screw in bolts -A- on body.
Tightening torques -B- : 50 Nm (37 ft. lbs.) + 90° torque angle
Tightening torques -A- : 50 Nm (37 ft. lbs.) + 90° torque angle
6. Screw in four screws from the exhaust system on the cross member-centre.
Tightening torque: 23 Nm (17 ft. lbs.)
Note: Screws which are tightened with a torque angle must be replaced with new ones.