Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-1237004.png)
2. Press the sockets from below into the top half of the housing "arrows 1 - 6" refer to 'Socket identification' until the locking tabs engage audibly.
3. Push the fuse carrier and relay carrier through the top half of the housing.
4. Insert the two rubber sleeves in the bottom half of the housing "arrows".
5. Place the top half of the housing on top of the lower half. When doing so, ensure that no lines become trapped between the two halves.
6. Screw together both housing halves with the fastening screws "2".
7. Press the fuse carrier into the top half of the housing "arrow A" until the locking tabs "B" engage audibly.
8. Press both relay carriers into the top half of the housing "arrow C" until the locking tabs engage audibly "D".
9. Clip in the wiring harness "arrow".
