Cayenne S (9PA) V8-4.5L (2003)
Wiring Harness: Service and Repair
Removing and Installing Wiring Harness For Door
Removing And Installing Wiring Harness For Door
Removing Wiring Harness For Door - Door Trim Panel
1. Remove door trim panel.
NOTE: Before removing door wiring harness, close door windows fully.
2. Detach insulation mat at bonding points "arrows" and remove.
3. Detach adhesive felt "arrow A" and move the lead from the installation position.
4. Undo fastening screw "1".
5. Pull air duct from mount "arrow B" and remove to the front "arrow C".