porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Wiring Harness In Engine Compartment|Page 5885 > < Removing and Installing Wiring Harness In Engine Compartment|Page 5883
Page 4
background image

4. Pull away side-impact protection from door unit carrier "arrow C" and push forward both plugs between side-impact protection and door unit

carrier "arrows D".

5. Unclip fastening clip using a release lever removal tool, universal 21 refer to 'Tools' "arrow".

6. Press rubber sleeve on cable for door opener out of the bore "arrow A".
7. Lift cable "arrow B" and pull out both leads underneath "arrow C".

8. Press out rubber sleeve to the inside "arrow" and pull both leads through the opening.

Removing and Installing Wiring Harness In Engine Compartment|Page 5885 > < Removing and Installing Wiring Harness In Engine Compartment|Page 5883