porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Wiring Harness In Engine Compartment|Page 5888 > < Removing and Installing Wiring Harness In Engine Compartment|Page 5886
Page 7
background image

8. Clip in lead "arrow A".
9. Press rubber sleeve on cable for door opener into the opening "arrow B" until it is felt to engage.

10. Press rubber sleeve into the opening from the inside "arrow" until it is felt to engage.

11. Lift side-impact protection "arrow A" and push both plugs to the rear between side-impact protection and door unit carrier "arrows B".
12. Insert both plugs "arrows C" until locking tabs "D" are felt to engage.
13. Install door unit carrier.
14. Install rear-view mirror.

Installing Wiring Harness For Door - Door Unit Carrier

Removing and Installing Wiring Harness In Engine Compartment|Page 5888 > < Removing and Installing Wiring Harness In Engine Compartment|Page 5886