Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-1244004.png)
15. Unlock plug connection "arrows A" and disconnect "arrow B".
16. Fold insulating mat forwards "arrow A".
17. Unclip wiring harness on bonnet hinge "arrows B".
18. Remove rear right wheel housing liner.
19. Remove tank for windscreen washer system.
20. Push the rubber sleeve inwards from the spring strut mount "arrow", push the water line with the rubber sleeve through the spring strut mount and
remove the wiring harness in the engine compartment in an upwards direction.
Installing Bonnet Wiring Harness
