porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

ABOUT US
Removing and Installing Wiring Harness In Engine Compartment|Page 5901 > < Removing and Installing Wiring Harness In Engine Compartment|Page 5899

Cayenne S (9PA) V8-4.5L (2003)

Page 10
background image

8. Cut through the tie-wrap "A" and take out the wiring harness on the right side "arrow B".

Installing Front Wiring Harness

1. Insert the wiring harness on the right side in the bumper "arrow A" and bring it into the installation position.
2. Connect the connector to the middle ParkAssist sensors "arrow B" until the locking tab "C" engages audibly.

3. Connect the connector to the side ParkAssist sensors "arrow A" until the locking tab "B" engages audibly.
4. Plug in the side ParkAssist sensors to the front spoiler "arrow C" until the locking tab "D" engages audibly.

5. Connect the connector to the fog lights "arrow A" until the locking tab "B" engages audibly.

Removing and Installing Wiring Harness In Engine Compartment|Page 5901 > < Removing and Installing Wiring Harness In Engine Compartment|Page 5899