porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Wiring Harness In Engine Compartment|Page 5914 > < Removing and Installing Wiring Harness In Engine Compartment|Page 5912
Page 23
background image

15. Insert plug into rear lid lock "arrow A" until locking tabs "arrows B" are felt to engage.
16. Insert plug into contact switch "arrow C" until locking tabs "arrows D" are felt to engage.
17. Install D-pillar trim.
18. Install roof lining.
19. Install trim for rear lid
20. Install side panel on rear lid

Tightening Torques

Removing and Installing Wiring Harness For Door

Removing And Installing Wiring Harness For Door

Removing Wiring Harness For Door - Door Trim Panel

1. Remove door trim panel.

NOTE:  Before removing door wiring harness, close door windows fully.

Removing and Installing Wiring Harness In Engine Compartment|Page 5914 > < Removing and Installing Wiring Harness In Engine Compartment|Page 5912