porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Wiring Harness In Engine Compartment|Page 5937 > < Removing and Installing Wiring Harness In Engine Compartment|Page 5935
Page 46
background image

15. Push antenna plug onto left antenna amplifier "arrow A" until locking tab "B" is felt to engage.
16. Tighten ground leads with fastening screws "2".

17. Push wiring harness through under the right wiring harness "arrow A".
18. Push both plugs onto right antenna amplifier "arrows B" until locking tabs "C" are felt to engage.

NOTE:  When connecting plugs, observe colour marking "a" on antenna amplifier.

19. Push plug onto white connection "b" of right antenna amplifier "arrow D"

20. Push plug through under the holder "arrow A".
21. Push plug onto GPS sensor "arrow B" until locking tabs "C" are felt to engage.
22. Screw down GPS sensor with fastening screws "C".

Removing and Installing Wiring Harness In Engine Compartment|Page 5937 > < Removing and Installing Wiring Harness In Engine Compartment|Page 5935