Cayenne S (9PA) V8-4.5L (2003)
In order to remove and install the wiring harness according to these instructions, the engine must be removed.
Remove Wiring Harness For Engine
1. Disconnect the electrical plug from the air conditioning compressor.
a. Pull the connector from the holder on the air conditioning compressor "A".
b. Press connectors "a" together and pull apart.
2. Disconnect the plug connections for camshaft switch-over valve 1-4 and 5-8.
a. Press connectors "a" together and pull apart.
3. Disconnect connector for bar ignition module 1-8.