Cayenne S (9PA) V8-4.5L (2003)
/v8-4.5l/Page-1244062.png)
a. Connect lines on the starter.
b. Insert and tighten fastening nuts "1" and fastening screws "2". Refer to 'Torque'
9. Fix the ground point.
a. Align the ground leads with the fastening screw and screw the fastening screws in the cylinder head. Refer to 'Torque'
10. Connect the clips from the injection wire to the cam shaft cover.
11. Connect the plug connections to injection valves 1-8.
a. Press the electrical connectors on the injection valves until they perceptibly engage.
12. Assemble the front crankcase ventilation.
