porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Wiring Harness In Engine Compartment|Page 5961 > < Removing and Installing Wiring Harness In Engine Compartment|Page 5959
Page 70
background image

2. Remove the plastic strip of the backrest covering on the right-hand side "arrow A".
3. Lever out the footwell light from the holder using a commercially available screwdriver "arrow B" and take it out of the holder "arrow B".
4. Press together plug lock "arrows D" and pull off the footwell light from the plug "arrow E".

5. Push back locking mechanism of airbag plug "arrow A" and remove plug "arrow B".
6. Release airbag plug on the seat frame "C" and push it out towards the front "arrow D".

7. Release ground plug "1" and central plug "2" to the backrest "arrows A" and disconnect both plugs "arrows B".

8. Release the two plugs "arrows A" and pull them off the seat adjuster switch "arrows B".

Removing and Installing Wiring Harness In Engine Compartment|Page 5961 > < Removing and Installing Wiring Harness In Engine Compartment|Page 5959