Cayenne S (9PA) V8-4.5L (2003)
Alignment: Technical Service Bulletins
Steering/Suspension - Front Axle Alignment Specs.
Cayenne
13/03
4495
Binder - 4 - Running Gear
Date: 10-24-03
Front Axle Alignment Specifications
Vehicle Type:
Cayenne / Cayenne S / Cayenne Turbo
Model Year:
As of '03 (3)
Concerns:
Front-axle adjustment values for suspension alignment.
-
Modified adjustment values,
-
New control values.
Information:
Enclosed with this Technical Information, you also receive an advance copy of the modified adjustment values for front-axle alignment for the Cayenne
Technical Manual, Group 4, "Repairs". These adjustment values replace all other previously published specifications.
New - A "control value" has been included for front-axle alignment.
Explanation:
Based on the settling behaviour of the vehicle, a "control value" for track adjustment on the front axle is introduced in addition to the usual "adjustment
values" for suspension alignment.
The upper tolerance limit of the control value is higher than the upper tolerance limit of the adjustment value
Track adjustment is only performed if the tolerance limit of the control value is not reached or is exceeded on the vehicle.
Wheel alignment should not be performed until the new vehicle has 120 miles (200 km) on the odometer. This is due to the fact that the settling behavior
of the Cayenne suspension is not complete after this distance. For further information on vehicle alignment, please refer to the enclosed attachments.
Filing:
Make copies of the attachments and file in the Cayenne Technical Manual accordingly.
Replace Chapter 44-1.
Insert Chapter "44-2.1 - Additional information on suspension alignment" behind Chapter 44-2.
Literature:
Cayenne Technical Manual, Group 4, Running gear.
Attachment:
>
44-1 Adjustment values for suspension alignment.
>
44-2.1 Additional information on suspension alignment (control value).
Adjustment values for suspension alignment
See requirements for suspension alignment --> 44-2.1 "Additional information on suspension alignment (control value)".