Cayenne S (9PA) V8-4.5L (2003)
Fluid Pan: Service and Repair
Removing and installing ATF pan
Removing ATF pan
1. Remove engine guard.
Caution:
^
Danger of scalding with hot ATF.
^
Wear personal protective equipment (e.g. safety goggles, gloves).
2. Place collection pan under the transmission. Unscrew oil drain plug -B- and drain ATF.
3. Screw in oil drain plug -B- with new sealing ring.
Tightening torque: 28 Nm (21 ft. lbs.)
4. Unscrew screws on the ATF pan and remove pan.
Installing ATF pan
Note:
^
Make sure that the seal has been positioned correctly on the bead of the oil pan edge.