Cayenne S (9PA) V8-4.5L (2003)
Shifter A/T: Service and Repair
Removing and Installing Selector Knob
Removing and installing selector knob
Removing selector knob
1. Selector lever is in position D.
Note:
^
The button at the front must not be pressed down when the selector knob is pulled.
2. Pull selector knob up and off.
Installing selector knob
Note:
^
The button must not be pressed down when the selector knob is installed.
1. Selector lever is in position D.
Caution: Spring in selector knob is overstretched!
^
Only move the selector knob as far forward until the tool can be inserted.
^
Avoid any further overstretching.