Cayenne S (9PA) V8-4.5L (2003)
5. Tighten fastening screw which fastens ATF line to the thermostat.
Tightening torque: 10 Nm (7.5 ft. lbs.)
Note: Counter when fastening the ATF lines.
6. Tighten ATF line screw connection on cooler side at the thermostat.
Tightening torque: 30 Nm (22 ft. lbs.)
^
The following three points also apply to the V8 Biturbo engine variant:
^
Connect suction line to engine. To do so, insert locking clip and push line on until it engages.
^
Connect lead of the ambient air valve module -2. To do so, fit the spring band clamp and connect lead.
^
Insert locking clip -1- on charge air cooler suction line and push line on until it engages.