Cayenne S (9PA) V8-4.5L (2003)
^
Brake fluid on electrical contacts (even thinned brake fluid) leads to corrosion and may cause faults in the system.
-> Wear protective goggles and gloves.
-> IMMEDIATELY remove any escaped brake fluid. CAREFULLY rinse again with water and dry if necessary. Look out for fuse carrier!
Removing
Overview of pedals
Overview of pedals excluding stop light switch
-1- - Seal
-2- - Hexagon nut
-3- - Mounting saddle
-4- - Pin
-5- - Hexagon nut
-6- - Hexagon-head bolt
-7- - Seal
-8- - Fixing clip/screw
-9- - Master cylinder
-10- - Mounting
-11- - Bolt
-12- - Clutch pedal
-13- - Cap
-14- - Lock (mechanical)
-15- - Clutch power spring
-16- - Bearing shell
-17- - Rubber stop
-18- - Lock (mechanical)
-19- - Pin
-20- - Lock (mechanical)
-21- - Mounting saddle for clutch pedal
-22- - Switch (clutch pedal switch)
-23- - Switch (interlock)
Installation position of clutch master cylinder