Cayenne S (9PA) V8-4.5L (2003)
Opening safety clip for pressure line connection of clutch master cylinder
4. Remove lines on brake fluid reservoir and clutch master cylinder -B- (pull strongly!).
5. Remove clutch pedal. To do this, detach pushrod of master cylinder from pedal. Insert pliers T10005 in the cut-outs on clutch pedal. Remove
clutch pedal -12-.
Disengaging clutch pedal
6. Remove fixing clips on clutch master cylinder. Carefully remove clutch master cylinder with a cleaning cloth (soiling of passenger compartment
with brake fluid!).
Installing
Information
Use a new line from the brake fluid reservoir to the clutch slave cylinder.
If the switches -22 - 23- have been removed from the mounting saddle of the clutch pedal -21- they must be replaced and their operation checked.
Replace all seals and sealing rings.
^
Remove plugs from the lines.
Overview of pedals